How to properly Clean, Protect, & Maintain Your Glass Table

August 25
Glass Table Care Tips

Due to where we locate them in our houses, tables often tend to get dirty and contaminated by different sorts of materials. Some tables will collect the normal fine dust while others are contaminated by food or drink spills. This could happen in a domestic or commercial application.

Bars and restaurants also have to make sure that their glass tables are well-cleaned. Due to the high number of people that visit such establishments, the kinds of waste that are deposited or that settles on the tables vary greatly and require thorough cleaning to remove it.

The following are some of the important things to consider and remember when cleaning a glass table

How do I prep the table for cleaning?

Before embarking on the actual cleaning job, it is important to prep the table for cleaning. The first step on how to clean a glass table is to remove any physical items that may be placed on the table. This could include items such as books, vases, bowls, etc. Such items could hinder the proper cleaning of the whole surface of the table.
Items such as books could also be destroyed when cleaning the table. Books are just some of the items that are sensitive to water and ingredients used in cleaning. After removing all the items, it is also important to sweep out all the physical waste that had been deposited at the table. The waste or debris could damage the glass while cleaning or further contaminate the table.

What cleaners should I use?

Well, there are two main options. You can either make your own domestic cleaning solution with domestic ingredients or go for professional cleaning solutions. This decision is mainly dependent on how complex the task is and whether you prefer to make your own cleaning solution or use an off-shelf solution.

Both options have results that are almost the same. The domestic cost-friendly option is to mix one part of white vinegar with two parts of water. After mixing the solution, you are ready to go. Use old newspaper to wipe the solution over the glass surface. This will prevent the formation of lint on the glass.

If you prefer to use an off-the-shelf solution, buy the light aerosol foam-based cleaners. Either of the above two options will give you a sparkling clean glass table.

Streaks and how to solve them

It is important to understand how to clean glass tables properly; merely moving and rubbing moisture over the table is not going to get the job done. If you are not careful, you will end up with streaks on your table. Streaks are caused by what is left on the table after all the water evaporates.

To begin with, always ensure that you use the right cleaning solutions. One of the most important tasks while cleaning a glass table is using the right cleaning agent. Not all cleaning agents are well-suited for that job!

A proper table cleaning agent leaves no streaks or traces after drying. The second thing is to make sure you use the right wiping tool. The cleaning towel used should be an absorbent in order to remove all the moisture from your table's surface.

If your cleaning towels are not absorbing the moisture well enough, you should replace them with newspapers. Learning how to clean glass tabletops with old newspapers is not only a cost-friendly way of cleaning but also ensures a streak-free job due to the newspaper's ability to absorb moisture easily.

It is also important to avoid cleaning your table in sight of direct sunlight or heat source. Direct sun can lead to an accelerated rate of moisture evaporation from the surface of the table. This sometimes can leave streaks on the glass surface.

Maintaining the glass glow

We all yearn to maintain the glow that a new glass table exudes while sitting in the room. Proper maintenance not only helps the table retain its glow but also protects the glass tabletop from damage and scratches. If proper care and maintenance are carried out, a good glass table can maintain its glow for years.

It is important to avoid placing objects with sharp edges or rough surfaces on the table. Objects such as machine tools and knives can end up scratching the table's glass surface and leave it with dents. If such objects are to be placed on the table, it is vital to make sure that there is a placemat resting between the glass surface and the item. Mats should also be used on glass dining tables.

In addition to following the above steps and guidelines while cleaning your table, it is also important to clean the table regularly in order to remove any dust or fingerprints that settle on the table's surface. This will ensure that your tables always have a glow.